Ppp Ifscan - THOMSON ST780 WL Cli Reference Manual

PPP Commands

ppp ifscan

Scan a PPPoE interface for available Access Concentrator and Service names.
i
Use the command :ppp ifdetach for this interface before performing a scan on it.
SYNTAX:
ppp ifscan
where:
intf
time
EXAMPLE:
=>ppp iflist
myRtPPPoE: dest : RtPPPoE_eth
Retry : 10
mode = IP routing
flags = echo magic accomp restart mru addr route savepwd
dns metric = 0
route : dst=0.0.0.0/0 - src=10.0.0.0/1 (metric 1)
auth = auto
admin state = down
LCP : state = initial
IPCP: state = initial
acname : ---
=>ppp ifscan intf=myRtPPPoE time=45
Service Name
Done !
=>
E-DOC-CTC-20061027-0012 v2.0
intf = <string>
[time = <number{0-36000}>]
The name of the PPPoE interface to be scanned.
A number between 0 and 36000 (seconds).
Represents the time to scan for services.
[00:00:00]
mru = 1492
user = johndoe@ISP password = ********
oper state = down
retransm = 9
retransm = 0
service : ---
link state = not-connected
term. reason =
term. reason =
Access Concentrator
REQUIRED
OPTIONAL
601