Sntp Commands - THOMSON ST780 WL Cli Reference Manual

SNTP Commands

36 SNTP Commands
Introduction
This chapter describes the commands of the Simple Network Time Protocol (SNTP) command group.
Contents
This chapter covers the following commands:
sntp add
sntp config
sntp delete
sntp flush
sntp list
E-DOC-CTC-20061027-0012 v2.0
Add a Network Time Protocol (NTP) server to the NTP server list.
Modify/display the SNTP client configuration.
Delete an NTP server from the NTP server list.
Flush the NTP server list and the SNTP client configuration.
List the NTP servers.
716
717
718
719
720
715