Mlp Privilege Config - THOMSON ST780 WL Cli Reference Manual

mlp privilege config

Modify a privilege.
SYNTAX:
mlp privilege config
where:
name The name of the privilege to be modified.
descr Set the privilege description.
Note
score Set the score of the privilege.
Note
EXAMPLE:
=>mlp privilege config name=myPrivilege descr="My test privilege" score=a12:def4
=>mlp privilege list verbose=all
anyaccess (access) All access privileges granted
unsecure_connection, channel_ftp, channel_telnet, channel_http,
channel_mdap, channel_serial, origin_lan, origin_wan, origin_local
anyservice (service) All service privileges granted
...
AP15 (access) WAN from all channels
unsecure_connection, channel_ftp, channel_telnet, channel_http,
channel_mdap, channel_serial, origin_wan
AP16 (access) LAN from HTTP/HTTPs
unsecure_connection, channel_http, origin_lan
myPrivilege (service) My test privilege
r_lan, r_fs_view, r_fs_retrieve, r_rtg, r_fwdg, r_frwl, r_ipsec_norm,
r_ipsec_adv, r_certificates, r_local, r_qos, and_lan, and_local, cli,
ftp
=>
554
name = <string>
[descr = <quoted string>]
[score = <{hex-word}[:{hex-word}] ex:
'a12:c30f'>]
The maximum length is 63 characters.
This is a hexadecimal value, for example "a12:c30f".
MLP Commands
REQUIRED
OPTIONAL
OPTIONAL
E-DOC-CTC-20061027-0012 v2.0