Ipqos Queue Config - THOMSON ST780 WL Cli Reference Manual

ipqos queue config

Modify the IPQoS subqueue configuration.
SYNTAX:
ipqos queue config
where:
dest
queue
propagate
ecnmarking
ackfiltering
maxpackets
484
dest = <string>
queue = <number{0-5}>
[propagate = <{disabled | enabled}>]
[ecnmarking = <{disabled | enabled}>]
[ackfiltering = <{disabled | enabled}>]
[maxpackets = <number{0-250}>]
[maxbytes = <number{0-128}>]
[respackets = <number{0-250}>]
[resbytes = <number{0-128}>]
[hold = <number>]
[markprob = <number{1-1000}>]
The destination interface for the IPQoS queues instantiation.
Typically, an ATM phonebook entry.
A number between 0 and 5.
Represents the number of the queue, where:
>
5 is the Real time queue
>
4 is the Assured Forwarding (AF) queue 4
>
3 is the AF queue 3
>
2 is the AF queue 2
>
1 is the AF queue 1
>
0 is the Best Effort queue.
Higher priority packets will be queued in a lower priority queue,
instead of being dropped, as soon as the destination queue is in
overflow state.
The packet will be put in a lower priority queue only once.
Choose between disabled or enabled.
The default is disabled.
Note The propagate flag for the lowest priority subqueue (the Best
Effort queue) has no meaning.
Enable Explicit Congestion Notification (ECN) for IP packets in this
subqueue (enabled) or not (disabled).
The default is disabled.
Enable filtering of TCP ACK packets (enabled) or not (disabled).
The default is disabled.
A number between 0 and 250.
Represents the maximum number of packets in this queue.
The default is 0 for the Real time queue and
Note 0 means that a maximum size is not enforced.
IPQoS Commands
100 for the other queues.
E-DOC-CTC-20061027-0012 v2.0
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL