Label Rule Modify - THOMSON ST780 WL Cli Reference Manual

Label Commands

label rule modify

Modify a label rule.
SYNTAX:
label rule modify
i
If a value is preceded by a "!", it means "NOT".
For example "srcintf=!wan" means "if srcintf is different from WAN".
where:
chain
index
newindex
name
clink
srcintf
srcip
dstip
serv
log
state
label
E-DOC-CTC-20061027-0012 v2.0
chain = <chain name>
index = <number>
[newindex = <number>]
[name = <string>]
[clink = <chain name>]
[srcintf [!]= <string>]
[srcip [!]= <{ip address | private}>]
[dstip [!]= <{ip address | private}>]
[serv [!]= <{service name}>]
[log = <{disabled | enabled}>]
[state = <{disabled | enabled}>]
[label = <string>]
The name of the chain which contains the rule.
The number of the rule in the chain.
The new number of the rule in the chain.
The name of the new rule.
The name of the chain to be parsed when this rule applies.
The name of the source interface expression.
The name of the source IP expression.
The name of the destination IP expression.
The name of the device expression.
Disable or enable logging when this rule applies.
Disable or enable this rule.
Choose between:
>
None
>
link (when clink is used)
>
label name.
REQUIRED
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
509