Eth Switch Mirror Capture - THOMSON ST780 WL Cli Reference Manual

Eth Commands

eth switch mirror capture

Define the specified port to be the Mirror Capture Port.
i
SYNTAX:
eth switch mirror capture
where:
port
EXAMPLE:
=>eth switch mirror capture port=2
=>eth switch mirror capture
Mirror capture port = 2
=>
RELATED COMMANDS:
eth switch mirror egress
eth switch mirror ingress
E-DOC-CTC-20061027-0012 v2.0
Only one port can be the Mirror Capture Port at any one time.
The port to be the Mirror Capture Port.
Note If no port number is specified, then the port number of
the Mirror Capture Port is shown.
Enable or disable the specified port to be the Mirror Egress Port.
Enable or disable the specified port to be the Mirror Ingress Port.
port = <number{1-4}>
REQUIRED
309