Atm Oam Cc Modify - THOMSON ST780 WL Cli Reference Manual

atm oam cc modify

Modify CC on the connection.
SYNTAX:
atm oam modify
where:
port The ATM port number.
Choose between:
>
DSL0
>
DSL1
>
ATM2
>
ATM3
>
AAL5
>
ATM5
Or specify a port number (dsl0 has port number 0).
vpi A number between 0 and 15.
Represents the VPI.
vci A number between 0 and 511.
Represents the VCI.
Note
transmit Enable or disable transmission of CC cells.
receive Enable or disable loss of continuity.
auto Enable or disable remote CC activation/deactivation.
span Select the CC span.
Choose between:
>
end2end: monitoring occurs on the entire VC between two ATM end
stations.
>
segment: monitoring occurs on a VC segment between the Thomson
ST and a first-hop ATM switch.
RELATED COMMANDS:
atm oam cc list
atm oam cc send
50
port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number>
vpi = <number{0-15}>
[vci = <number{0-511}>]
[transmit = <{disabled | enabled}>]
[receive = <{disabled | enabled}>]
[auto = <{disabled | enabled}>]
[span = <{segment | end2end}>]
For a Virtual Path (VP) cross-connection, use 0 or do not specify.
Display Continuity Check (CC) configuration.
Send CC activate/deactivate to connection.
ATM Commands
REQUIRED
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20061027-0012 v2.0