Firewall Level Modify - THOMSON ST780 WL Cli Reference Manual

firewall level modify

Configure a security level.
SYNTAX:
firewall level modify
where:
name
index
readonly
udptrackmode
proxy
service
text
364
name = <string>
[index = <number>]
[readonly = <{disabled | enabled}>]
[udptrackmode = <{strict | loose}>]
[service = <{disabled | enabled}>]
[proxy = <{disabled|enabled}>]
[text = <quoted string>]
The name of the security level to be added.
The index of the security level.
Use the command :firewall level list to
Tip
obtain a list of indexes.
Select whether the security level is readonly (enabled) or not
(disabled).
Select the UDP connection tracking mode.
Choose between:
>
strict: replies to a request from a client must be in a specific
window to the client.
>
loose: inbound packets are allowed on the port that was
first used to start the communication with the server (for
example to allow a client of an online game to obtin peer-
to-peer information from other clients of that same online
game).
The default is strict.
Enable or disable proxy system services for this security level.
Disable or enable service definitions for this security level.
Description of the security level.
Note The maximum length is 39 characters.
Firewall Commands
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20061027-0012 v2.0