Atm Cac Config - THOMSON ST780 WL Cli Reference Manual

atm cac config

Configure the ATM connection admission control.
SYNTAX:
atm cac config
where:
config The port for which CAC is configured.
port
state Enable/disable CAC for an ATM port.
EXAMPLE:
{Administrator}=>atm cac config
port = dsl0
state = enabled
:atm cac config port=dsl0 state=enabled
{Administrator}=>
RELATED COMMANDS:
atm cac list
atm cac overbooking
38
config port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or
number>
state = <{disabled|enabled}>
Display all the CAC parameters.
Configure ATM overbooking parameters.
ATM Commands
REQUIRED
REQUIRED
E-DOC-CTC-20061027-0012 v2.0