Connection Config - THOMSON ST780 WL Cli Reference Manual

connection config

Configure the connection handling.
SYNTAX:
connection config
where:
configchangemode
probes
udptrackmode
EXAMPLE:
=>connection config
config change mode : immediate
alive probes
udp tracking mode
=>
90
[configchangemode = <{immediate | delayed}>]
[probes = <{disabled | enabled}>]
[udptrackmode = <{strict | loose}>]
Select how configuration changes are handled.
Choose between:
>
immediate
>
delayed.
The default is immediate.
Enable or disable live probes on idle connections.
The default is disabled.
Select the User Datagram Protocol (UDP)
connection tracking mode.
Choose between:
>
strict: replies to a request from a client must be
in a specific window to the client.
>
loose: inbound packets are allowed on the port
that was first used to start the communication
with the server (for example to allow a client of
an online game to obtain peer-to-peer
information from other clients of that same
online game).
The default is strict.
: disabled
: loose
Connection Commands
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20061027-0012 v2.0