Grp Rtlist - THOMSON ST780 WL Cli Reference Manual

grp rtlist

Show the current routes in the GRP interfaces routing table.
SYNTAX:
grp rtlist
where:
dst
dstmask
EXAMPLE:
=>grp rtlist
Codes : K - kernel, C - connected, S - static, R - rip, * - FIB route
destination : 10.0.0.0/24 *
Route type : "C"
distance : 0
Nexthop : LocalNetwork
destination : 10.0.0.0/24
Route type : "K"
distance : 1
Nexthop : 10.0.0.138
destination : 127.0.0.0/8 *
Route type : "C"
distance : 0
Nexthop : loop
destination : 192.168.1.0/24 *
Route type : "C"
distance : 0
Nexthop : LocalNetwork
destination : 192.168.1.0/24
Route type : "K"
distance : 1
Nexthop : 192.168.1.254
destination : 255.255.255.255/32 *
Route type : "K"
distance : 1
Nexthop : 127.0.0.1
=>
380
[dst = <ip-address>]
[dstmask = <ip-mask (dotted or cidr)>]
The destination IP address of the route.
Supports IP/mask notation.
Note If no destination IP address is specified, all the current routes
will be shown.
The destination IP address mask, either in dotted or in numerical cidr
notation.
GRP Commands
OPTIONAL
OPTIONAL
E-DOC-CTC-20061027-0012 v2.0