Atm Commands - THOMSON ST780 WL Cli Reference Manual

ATM Commands

3 ATM Commands
Introduction
This chapter describes the commands of the atm command group.
Contents
This chapter covers the following commands:
atm flush
atm ifadd
atm ifattach
atm ifconfig
atm ifdelete
atm ifdetach
atm iflist
atm bundle add
atm bundle attach
atm bundle config
atm bundle clear
atm bundle delete
atm bundle detach
atm bundle flush
atm bundle ifadd
atm bundle ifconfig
atm bundle ifdelete
atm bundle list
atm cac config
atm cac list
atm cac overbooking
atm debug aal5stats
atm debug gstats
atm debug portstats
atm oam config
atm oam list
atm oam modify
atm oam ping
atm oam cc list
atm oam cc modify
atm oam cc send
E-DOC-CTC-20061027-0012 v2.0
Flush all Asynchronous Transfer Mode (ATM) interfaces.
Create a new ATM interface.
Attach a ATM interface.
Configure an ATM interface.
Delete an ATM interface.
Detach an ATM interface.
Display the ATM interfaces.
Add a new bundle of interfaces.
Attach a bundle of interfaces.
Modify a bundle of interfaces.
Clear the bundle statistics.
Delete a bundle of interfaces.
Detach a bundle of interfaces.
Flush all bundles.
Add an interface on a bundle.
Configure an interface from a bundle.
Remove an interface from a bundle.
Display the current bundles.
Configure the ATM connection admission control.
Display all the CAC parameters.
Configure ATM overbooking parameters.
Display ATM Adaptation Layer 5 (AAL5) port specific ATM statistics.
Display ATM global statistics.
Display port specific ATM statistics.
Modify the ATM Operation and Maintenance (OAM) settings.
Display the ATM OAM settings.
Modify the ATM OAM data blocking mode.
Send ATM loopback cells.
Display Continuity Check (CC) configuration.
Modify CC on the connection.
Send CC activate/deactivate to connection.
19
20
21
22
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
48
49
50
51
17