Service System Ifadd - THOMSON ST780 WL Cli Reference Manual

Service Commands

service system ifadd

Add an interface group to the access list.
SYNTAX:
service system ifadd
where:
name
group
EXAMPLE:
=>service system list name=SIPPBX expand=enabled
Idx Name
---------------------------------------------------------------------------------
1 SIPPBX
=>service system ifadd name=SIPPBX group=lan
=>service system list name=SIPPBX expand=enabled
Idx Name
---------------------------------------------------------------------------------
1 SIPPBX
=>
RELATED COMMANDS:
service system ifdelete
E-DOC-CTC-20061027-0012 v2.0
name = <string>
group = <{wan|local|lan|tunnel|dmz|guest} or
number>
The name of the system service for this access list.
The interface group for this access list.
Protocol SrcPort
udp
Description................ SIP PBX, registrar and proxy
Properties................. server
Managed parameters......... state port acl map log
Source Ip Selection........ auto
Interface Access List...... any
Ip Access List............. any
NAT Port List.............. 5060
Protocol SrcPort
udp
Description................ SIP PBX, registrar and proxy
Properties................. server
Managed parameters......... state port acl map log
Source Ip Selection........ auto
Interface Access List...... lan
Ip Access List............. any
NAT Port List.............. 5060
Delete an interface group from the access list.
DstPort Group
5060
DstPort Group
5060
REQUIRED
REQUIRED
State
disabled
State
disabled
641