Hostmgr Config - THOMSON ST780 WL Cli Reference Manual

Hostmgr Commands

hostmgr config

Configure the host manager parameters.
SYNTAX:
hostmgr config
where:
state
scantime
autosave
trace
EXAMPLE:
=>hostmgr config
state
scantime : 30 sec.
autosave : enabled
trace
=>
E-DOC-CTC-20061027-0012 v2.0
[state = <{disabled | enabled}>]
[scantime = <number{10-600}>]
[autosave = <{disabled | enabled}>]
[trace = <{disabled | enabled}>]
Enable or disable the host manager daemon.
The default is enabled.
A number between 10 an 600 (seconds).
Represents the time between two scans.
The default is
Enable or disable automatic saves to flash memory.
The default is enabled.
Enable or disable the host manager traces.
The default is disabled.
: enabled
: disabled
30 (seconds).
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
393