Ip Debug Traceconfig - THOMSON ST780 WL Cli Reference Manual

IP Commands

ip debug traceconfig

Display/modify the IP stack trace configuration.
SYNTAX:
ip debug traceconfig
where:
input
forward
output
drop
path
mode
arp
E-DOC-CTC-20061027-0012 v2.0
[input = <{none | label | -telnet | -host |
[forward = <{none | label | -telnet | -host |
[output = <{none | label | -telnet | -host |
[drop = <{none | label | -telnet | -host |
[path = <{none | label | -telnet | -host |
[mode = <{line | dump}>]
[arp = <{none | all}>]
Define the input packets that will be traced.
The default is none.
Define the forward packets that will be traced.
The default is none.
Define the output packets that will be traced.
The default is none.
Define the packet drops that will be traced.
The default is all.
Define the packet that will be path-traced.
The default is none.
Select the packet dump method.
Choose between:
>
line:
>
dump: .
The default is line.
Define the ARP packets that will be traced.
The default is none.
-broadcast | all}>]
-broadcast | all}>]
-broadcast | all}>]
-broadcast | all}>]
-broadcast | all}>]
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
473