Atm Ifadd - THOMSON ST780 WL Cli Reference Manual

atm ifadd

Create a new ATM interface.
SYNTAX:
atm ifadd
where:
intf The name for the new ATM interface.
Note
EXAMPLE:
=>atm iflist
atm_0_35 : dest : atm_pvc_0_35
Retry : 10
Connection State : connected
=>
=>atm ifadd intf = RtPPPoA_atm
=>
=>atm iflist
atm_0_35 : dest : atm_pvc_0_35
Retry : 10
Connection State : connected
RtPPPoA_atm: dest : (none)
Retry : 10
Connection State : not-connected
=>
RELATED COMMANDS:
atm ifdelete
atm iflist
20
intf = <string>
If not specified, the destination parameter must be specified. In this
case the name of the destination will double as interface name.
QoS : default Encaps : vcmux Fcs : disabled Ulp : mac
QoS : default Encaps : vcmux Fcs : disabled Ulp : mac
QoS : default Encaps : llc Fcs : disabled Ulp : ip
Delete an ATM interface.
Display the ATM interfaces.
ATM Commands
REQUIRED
E-DOC-CTC-20061027-0012 v2.0