System Config - THOMSON ST780 WL Cli Reference Manual

system config

Set/change the system configuration parameters.
!
For a good operation of UPnP and the discovery mechanism, it is highly recommended not to
change the system configuration settings.
SYNTAX:
system config
where:
upnp
tr64
mdap
drst
led
resetbutton
digestauth
defaultconnection
rtc
autosave
726
[upnp = <{disabled | enabled}>]
[tr64 = <{disabled | enabled}>]
[mdap = <{disabled | enabled}>]
[drst = <{disabled | enabled}>]
[led = <{green | red | orange | flash | off}>]
[resetbutton = <{disabled | enabled}>]
[digestauth = <{disabled | enabled}>]
[defaultconnection = <string>]
[rtc = <{disabled|enabled}>]
[autosave = <{disabled | enabled}>]
[autosavedelay = <number{0-600}>]
Enable or disable UPnP discovery.
The default is enabled.
Enable or disable TR-64 discovery.
The default is disabled.
Enable or disable proprietary discovery protocol.
The default is enabled.
Enable or disable DrSpeedTouch access.
The default is disabled.
Set the system LED colour.
Choose between:
>
green: solid green
>
red: solid red
>
orange: solid orange
>
flash: toggle between green and orange
>
off: LED is off.
The default is green.
Enable or disable reset-to-factory-defaults pushbutton.
The default is enabled.
Enable or disable HTTP digest authentication.
The default is enabled.
The name of the default internet connection.
Enable or disable RTC.
The default is disabled
Enable or disable autosaves.
The default is enabled.
System Commands
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20061027-0012 v2.0