Sntp Config - THOMSON ST780 WL Cli Reference Manual

SNTP Commands

sntp config

Modify/display the SNTP client configuration.
SYNTAX:
sntp config
where:
state
poll
pollpresync
EXAMPLE:
=>sntp config
SNTP configuration:
state = enabled
poll interval = 60 minute(s)
poll interval (before first sync) = 60 minute(s)
=>
E-DOC-CTC-20061027-0012 v2.0
[state = <{enabled | disabled}>]
[poll = <number{1-60}>]
[pollpresync = <number{1-60}>]
Enable or disable the Thomson ST SNTP client.
The default is enabled.
A number between 1 and 60 (minutes).
Represents the time interval for the SNTP client to poll the configured
NTP server and, if needed, (re-)synchronize its internal clock.
The default is 60.
polling interval before first sync (1 min, ... ,60min)
OPTIONAL
OPTIONAL
OPTIONAL
717