Atm Phonebook Add - THOMSON ST780 WL Cli Reference Manual

ATM Commands

atm phonebook add

Add a new phonebook entry.
SYNTAX:
atm phonebook add
where:
name
addr
EXAMPLE:
=>atm phonebook list
Name
atm_pvc_0_35 1
=>atm phonebook add name=RtPPPoA addr=8.35
=>atm phonebook list
Name
atm_pvc_0_35 1
RtPPPoA
=>
RELATED COMMANDS:
atm phonebook delete
atm phonebook list
E-DOC-CTC-20061027-0012 v2.0
name = <string>
addr = <atmchannel : PVC syntax is [port.]vpi.vci
The name of the new phonebook entry.
This name can be freely chosen, however two limitations apply:
>
The name of a phonebook entry intended for the Relayed PPPoA
(PPPoA-to-PPTP Relaying) packet service may not start with capital P or
capital T
>
The name of a phonebook entry intended for the PPP-to-DHCP
spoofing packet service must start with DHCP (for example
DHCP_Spoof01).
The ATM address for this destination.
It is composed of a VPI and a VCI identifying ATM virtual channels. In most
cases the values are provided by the Service Provider.
Accepted VPI: a number between 0 and 15.
Accepted VCI: a number between 0 and 511.
Use Address
0.35
Use Address
0.35
0 8.35
Delete an existing phonebook entry.
Display the current phonebook.
port=dsl0 | ...>
REQUIRED
REQUIRED
55