Dhcp Client Ifadd - THOMSON ST780 WL Cli Reference Manual

dhcp client ifadd

Create a DHCP client.
SYNTAX:
dhcp client ifadd
where:
intf
defrqoptions
EXAMPLE:
=>dhcp client iflist
No dynamic interfaces defined.
=>dhcp client ifadd intf=myPPP_ppp
[dhcp client]=>iflist
DHCP Client Info :
Interface
DHCP Client State
HW address
Client ID
IP Address
p-t-p IP
Default Gateway
Number of leases: 1
Total size of table: 68, in use: 1, free: 98 %=>
RELATED COMMANDS:
dhcp client ifdelete
dhcp client iflist
interface list
112
intf = <string>
[defrqoptions = <{disabled|enabled}>]
The name of the dynamic interface for which a DHCP lease
must be created.
Enable/Disable the creation of the default Parameter Request
List.
: myPPP_ppp
: [INIT]
: 00:0e:50:91:26:5a
:
: 0.0.0.0
: 0.0.0.0
:
Delete a DHCP client.
List all the DHCP leases attached to dynamic interfaces.
Display interfaces.
DHCP Commands
REQUIRED
OPTIONAL
E-DOC-CTC-20061027-0012 v2.0