Firewall Debug Traceconfig - THOMSON ST780 WL Cli Reference Manual

Firewall Commands

firewall debug traceconfig

Configure the firewall trace options.
SYNTAX:
firewall debug traceconfig
where:
tcpchecks
udpchecks
icmpchecks
sink
forward
source
EXAMPLE:
=>firewall debug traceconfig
Trace Config
============
tcpchecks
icmpchecks
sink
forward
source
=>
E-DOC-CTC-20061027-0012 v2.0
[tcpchecks = <{disabled | enabled}>]
[udpchecks = <{disabled|enabled}>]
[icmpchecks = <{disabled | enabled}>]
[sink = <{none | all | accept | deny | drop
[forward = <{none | all | accept | deny | drop
[source = <{none | all | accept | deny | drop
Disable or enable tcpchecks traces.
The default is disabled.
Disable or enable udpchecks traces.
The default is disabled.
Disable or enable icmpchecks traces.
The default is disabled.
Specify the action traced by the firewall for sink traffic.
The default is none.
Specify the action traced by the firewall for forward traffic.
The default is none.
Specify the action traced by the firewall for source traffic.
The default is none.
: disabled
: disabled
: none
: none
: none
| reset} or number>]
reset} or number>]
| reset} or number>]
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
359