Ip Auto Ifconfig - THOMSON ST780 WL Cli Reference Manual

ip auto ifconfig

Configure an autoIP interface.
SYNTAX:
ip auto ifconfig
where:
intf The name of the autoIP interface to be configured.
addr The preferred link-local IP address.
poolstart The start IP address of the link-local address pool.
The default is 169.254.1.1.
poolend The end IP address of the link-local address pool.
The default is 169.254.254.254.
netmask The netmask of the link-local IP address pool.
The default is 16.
claim A number between 0 and 65535.
Represents the number of link-local address selection retries before
giving up.
The default is 10.
defence A number between 0 and 65535.
Represents the number of times the link-local address is defended before
releasing the address.
The default is 5.
probe A number between 0 and 65535.
Represents the number of ARP probes to be sent before accepting a link-
local address.
The default is 4.
interval A number between 1 and 65535 (seconds).
Represents the time interval between two ARP probe transmissions.
The default is 2.
464
intf = <string>
[addr = <ip-address>]
[poolstart = <ip-address>]
[poolend = <ip-address>]
[netmask = <ip-mask(dotted or cidr)>]
[claim = <number{0-65535}>]
[defence = <number{0-65535}>]
[probe = <number{0-65535}>]
[interval = <number{1-65535}>]
IP Commands
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20061027-0012 v2.0