Service System Ipadd - THOMSON ST780 WL Cli Reference Manual

Service Commands

service system ipadd

Add an IP address (range) to the access list.
SYNTAX:
service system ipadd
where:
name
ip
EXAMPLE:
=>service system list name=SIPPBX expand=enabled
Idx Name
---------------------------------------------------------------------------------
1 SIPPBX
=>service system ipadd name=SIPPBX ip=192.168.1.64
=>service system list name=SIPPBX expand=enabled
Idx Name
---------------------------------------------------------------------------------
1 SIPPBX
=>
RELATED COMMANDS:
service system ipdelete
E-DOC-CTC-20061027-0012 v2.0
name = <string>
ip = <ip-range>
The name of the system service for this access list.
The IP address (range) for this access list.
Protocol SrcPort
udp
Description................ SIP PBX, registrar and proxy
Properties................. server
Managed parameters......... state port acl map log
Source Ip Selection........ auto
Interface Access List...... any
Ip Access List............. any
NAT Port List.............. 5060
Protocol SrcPort
udp
Description................ SIP PBX, registrar and proxy
Properties................. server
Managed parameters......... state port acl map log
Source Ip Selection........ auto
Interface Access List...... any
Ip Access List............. 192.168.1.64
NAT Port List.............. 5060
Delete an IP address (range) from the access list.
DstPort Group
5060
DstPort Group
5060
REQUIRED
REQUIRED
State
disabled
State
disabled
643