Atm Oam Ping - THOMSON ST780 WL Cli Reference Manual

atm oam ping

Send ATM loopback cells.
SYNTAX:
atm oam ping
where:
dest The destination address for the request.
This can be any ATM phonebook entry.
count A number between 1 and 1000000.
Represents the number of pings to send.
interval A number between 100 and 1000000 (milliseconds).
Represents the interval between packets.
EXAMPLE:
=>atm oam ping dest=atm_ph_8_35 count=10 interval=1000
loopback: successful, sequence: 1 time: 37890 usec
loopback: successful, sequence: 2 time: 39118 usec
loopback: successful, sequence: 3 time: 39116 usec
loopback: successful, sequence: 4 time: 39187 usec
loopback: successful, sequence: 5 time: 38605 usec
loopback: successful, sequence: 6 time: 38764 usec
loopback: successful, sequence: 7 time: 38752 usec
loopback: successful, sequence: 8 time: 38813 usec
loopback: successful, sequence: 9 time: 38848 usec
loopback: successful, sequence: 10 time: 38941 usec
--- loopback statistics ---
10 loopbacks transmitted, 10 successful, 0% loss, time 1390 ms
rtt min/avg/max = 37890/38803/39187
=>
RELATED COMMANDS:
atm oam config
atm oam list
atm oam modify
48
dest = <string>
[count = <number{1-1000000}>]
[interval = <number{100-1000000}>]
Modify the ATM Operation and Maintenance (OAM) settings.
Display the ATM OAM settings.
Modify the ATM OAM data blocking mode.
ATM Commands
REQUIRED
OPTIONAL
OPTIONAL
E-DOC-CTC-20061027-0012 v2.0