Wireless Mssid Ifconfig - THOMSON ST780 WL Cli Reference Manual

wireless mssid ifconfig

Configure an SSID context.
SYNTAX:
wireless mssid ifconfig
where:
SSID_ID SSID ID number
SSID SSID name
apisolation enable or disable AP isolation
secmode set security mode
WEPkey WEP key
The expected format is 5 or 13 ASCII characters, or 10 or 26 HEX digits.
addscript Creation data interfaces
delscript Remove data interfaces
844
ssid_id = <number{1-3}>
[ssid = <string>]
[apisolation = <{disabled|enabled}>]
[secmode = <{disable|wep}>]
[WEPkey = <quoted string>]
[addscript = <quoted string>]
[delscript = <quoted string>]
Wireless Commands
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20061027-0012 v2.0