User Add - THOMSON ST780 WL Cli Reference Manual

user add

Add a user.
i
You can only add a user whose privileges are the same or lower than your own privileges.
SYNTAX:
user add name = <quoted string>
password = <password>
role = <string>
[hash2 = <string>]
[descr = <quoted string>]
[defuser = <{disabled | enabled}>]
[defremadmin = <{disabled | enabled}>]
[deflocadmin = <{disabled | enabled}>]
where:
name
password
role
hash2
descr
defuser
defremadmin
deflocadmin
772
The new user name.
Note 1. The maximum number of users is 10.
2. The maximum length is 32 characters.
The password.
Note The maximum length is 32 characters.
The role name.
Use the command :mlp role list to obtain the role
Tip
name (see " mlp role list" on page 565
tion).
The MD5 hash.
Note The maximum length is 32 characters.
A user description.
Note The maximum length is 63 characters.
Set this user as the default user (enabled) or not (disabled).
Note When the Web interface is accessed, the account of this user
will be used by default. The user will not need to
authenticate himself with user name or password.
The default is disabled.
Set this user as the default remote administrator (enabled) or not
(disabled).
The default is disabled.
Set this user as the default local administrator (enabled) or not
(disabled).
The default is disabled.
User Commands
REQUIRED
REQUIRED
REQUIRED
for more informa-
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20061027-0012 v2.0