Dsd Debug Proxy - THOMSON ST780 WL Cli Reference Manual

DSD Commands

dsd debug proxy

Display/modify the HyperText Transfer Protocol (HTTP) Intercept fixed proxy configuration.
SYNTAX:
dsd debug proxy
where:
state
dest
port
EXAMPLE:
=>dsd debug proxy
State : off
Dest.IP : 0.0.0.0
Port : 0
=>
E-DOC-CTC-20061027-0012 v2.0
[state = <{disabled | enabled}>]
[dest = <ip-address>]
[port = <{supported TCP/UDP port} or number>]
Enable or disable fixed proxy redirecting.
The default is disabled.
The destination IP address to which requests will be forwarded.
The port to be used for connecting to proxy.
Select one of the supported Transmission Control Protocol (TCP)/UDP
port names (see " Supported TCP/UDP Port Names" on page
alternatively, specify the port number.
OPTIONAL
OPTIONAL
OPTIONAL
863) or,
215