Snmp Community Add - THOMSON ST780 WL Cli Reference Manual

snmp community add

Configure an SNMP community string to allow SNMP access over IP.
SYNTAX:
snmp community add
where:
securityname
communityname
EXAMPLE:
=>snmp community add
securityname = RWCommunity
communityname = *******
Please retype communityname for verification.
communityname = *******
:snmp community add securityname=RWCommunity communityname=_DEV_2C6A78E1C41E7B01
=>snmp community add
securityname = ROCommunity
communityname = ******
Please retype communityname for verification.
communityname = ******
:snmp community add securityname=ROCommunity communityname=_DEV_184B05F89719A74E
=>
RELATED COMMANDS:
snmp community delete
snmp community list
704
securityname = <{RWCommunity | ROCommunity}>
communityname = <password>
Configure access rights/restrictions control for the community
name.
Choose between:
>
RWCommunity: read/write access rights
>
ROCommunity: read only access rights.
Configure the SNMP community name.
Delete an SNMP community string to prevent SNMP access over IP.
List all SNMP community strings in use for SNMP access over IP.
SNMP Commands
REQUIRED
REQUIRED
E-DOC-CTC-20061027-0012 v2.0