Service System Modify - THOMSON ST780 WL Cli Reference Manual

Service Commands

service system modify

Modify a system service.
SYNTAX:
service system modify
where:
name
state
port
srcintf
log
qoslabel
routelabel
natpmweight
forward
RELATED COMMANDS:
service system list
E-DOC-CTC-20061027-0012 v2.0
name = <string>
[state = <{disabled | enabled}>]
[port = <supported port or number>]
[srcintf = <string>]
[log = <{disabled|enabled}>]
[qoslabel = <{None|DSCP|Interactive|
Management|Video|VoIP|default}>]
[routelabel = <{None|DSCP|Interactive|
Management|Video|VoIP|default}>]
[natpmweight = <number{0-255}>]
[forward = <{disabled|enabled}>]
The name of the system service for this map.
Disable or enable this system service.
The port for this map.
Select one of the supported TCP/UDP port names (see
" Supported TCP/UDP Port Names" on page
alternatively, specify the port number.
The primary IP interface for this system service.
Disable or enable service logging
QoS label for service data
Route label for service data
NAT portmap weight for this service
Disable or enable service forwarding
Display the system services.
REQUIRED
OPTIONAL
OPTIONAL
863) or,
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
649