Firewall Rule Add - THOMSON ST780 WL Cli Reference Manual

firewall rule add

Add a firewall rule.
SYNTAX:
firewall rule add
i
If a value is preceded by a "!", it means NOT.
For example "srcintf=!wan" means "if the source interface is different from WAN".
where:
chain The name of the chain which contains the rule.
index The number of the rule in the chain.
name The name of the new rule.
clink The name of the chain to be parsed when this rule applies.
srcintf The name of the source interface expression.
srcip The name of the source IP expression.
dstintf The name of the destination interface expression.
dstip The name of the destination IP expression.
serv The name of the service expression.
log Disable or enable logging is done when this rule applies.
state Enable or disable this rule.
action The action to be taken when this rule applies ('link' when clink is used).
RELATED COMMANDS:
firewall rule delete
expr list
366
chain = <chain name>
[index = <number>]
[name = <string>]
[clink = <chain name>]
[srcintf [!]= <string>]
[srcip [!]= <string>]
[dstip [!]= <string>]
[serv [!]= <string>]
[log = <{disabled | enabled}>]
[state = <{disabled | enabled}>]
action = <{accept|deny|drop|reset|count|link}>
Delete a firewall rule.
List the expressions.
Firewall Commands
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
REQUIRED
E-DOC-CTC-20061027-0012 v2.0