Eth Switch Mirror Egress - THOMSON ST780 WL Cli Reference Manual

eth switch mirror egress

Enable or disable the specified port to be the Mirror Egress Port.
i
Only one port can be the Mirror Egress Port at any one time.
But a port can be the Mirror Egress Port and the
Mirror Ingress Port at the same time.
SYNTAX:
eth switch mirror egress
where:
port
state
EXAMPLE:
Here port 1 is enabled as Mirror Egress Port
=>eth switch mirror egress port=1
=>eth switch mirror egress
Egress mirror port = 1
=>
Here port 1 is disabled as Mirror Egress Port
=>eth switch mirror egress
Egress mirror port = 1
=>eth switch mirror egress port=1 state=disabled
=>eth switch mirror egress
=>
RELATED COMMANDS:
eth switch mirror capture
eth switch mirror ingress
310
port = <number{1-4}>
[state = <{enabled | disabled}>]
The port to be the Mirror Egress Port.
Note If no port number is specified, then the port number of
the current Mirror Egress Port is shown.
Enable or disable the port as Mirror Egress Port.
The default is enabled.
Define the specified port to be the Mirror Capture Port.
Enable or disable the specified port to be the Mirror Ingress Port.
Eth Commands
REQUIRED
OPTIONAL
E-DOC-CTC-20061027-0012 v2.0