Service Host Rule Add - THOMSON ST780 WL Cli Reference Manual

Service Commands

service host rule add

Create/define a host service portmap.
SYNTAX:
service host rule add
where:
name
protocol
baseport
portrange
triggerport
triggerprotocol
RELATED COMMANDS:
service host rule delete
E-DOC-CTC-20061027-0012 v2.0
name = <quoted string>
[protocol = <{any|tcp|udp} or number>]
[baseport = <supported UDP port | number>]
portrange = <port-range>
[triggerport = <supported UDP port | number>]
[triggerprotocol = <{any|tcp|udp} or number>]
The name of the host service.
The IP protocol type.
Choose between:
>
any
>
tcp
>
udp
>
a number.
The inbound base port.
Select one of the supported TCP/UDP port names (see
" Supported TCP/UDP Port Names" on page
alternatively, specify the port number.
Note If not specified, baseport
portrange.
The outbound port range.
The outbound trigger port.
Select one of the supported TCP/UDP port names (see
" Supported TCP/UDP Port Names" on page
alternatively, specify the port number.
Protocol of the trigger port.
Choose between:
>
any
>
tcp
>
udp
>
a number.
Note If not specified, triggerprotocol
Delete a host service portmap.
863) or,
is equal to the first port of
863) or,
is equal to protocol.
REQUIRED
OPTIONAL
OPTIONAL
REQUIRED
OPTIONAL
OPTIONAL
639