Grp Rip Show - THOMSON ST780 WL Cli Reference Manual

GRP Commands

grp rip show

Show the RIP settings and the routes in the RIP database.
SYNTAX:
grp rip show
EXAMPLE:
=>grp rip show
RIP routing protocol config dump
------------------------------------
RIP daemon is enabled
Global RIP queries received : 0
Global RIP route changes : 3
Default version : send rip_v2, receive rip_v2
Default redistribution metric is 1
Sending routing table updates every 30 seconds with +/-5%
Route timeout after 180 seconds
Route garbage collect after 120 seconds
Import of connected routes is enabled
Import of kernel routes is enabled
Import of static routes is enabled
Import of default kernel route is enabled
Import of default static route is enabled
Export of RIP routes is enabled
Export of default RIP route is enabled
Transmission of default RIP route is enabled
Intf
ates
---------------------------------------------------------------------------------------------
----
eth0
62
RIP route table dump
----------------------
Codes : K - Kernel, C - connected, S - Static, R - RIP, * - FIB route
Network
---------------------------------------------------------------------
R 0.0.0.0/0
C 10.0.0.0/8
K 129.132.2.21/32
C 138.203.4.0/22
C 172.16.1.0/24
=>
E-DOC-CTC-20061027-0012 v2.0
Send Recv AuthMode Passive
rip_unspec rip_unspec none
Next Hop
192.6.11.150
138.203.7.146
SplitHorizon BadPackets BadRoutes SentUpd
off on
Metric From
3 192.6.11.150
1
1
1
1
0 58
Flags
<> *
<> *
<> *
<> *
<> *
387