Wireless Secmode Config - THOMSON ST780 WL Cli Reference Manual

wireless secmode config

Configure/show the security mode.
SYNTAX:
wireless secmode config
where:
mode The security mode.
Choose between:
>
>
>
>
The default is
This is to enable an easy first use).
EXAMPLE:
=>wireless secmode config
No security enabled, open authentication, no data encryption
=>wireless secmode config mode=wep
=>wireless secmode config
Security level WEP:
encryption key
=>wireless secmode config mode=wpa-psk
=>wireless secmode config
Security level WPA-PSK:
preshared key
encryption
rekeying
=>
830
[mode = <{disable | wep | wpa-psk | wpa}>]
disable: no security
wep: Wired Equivalent Privacy (WEP)
wpa-psk: Wi-Fi Protected Access (WPA) - Pre-Shared Key (PSK)
wpa: Wi-Fi Protected Access (WPA).
disable (in other words, by default, there is no security.
: 26FF871306
: 26FF871306
: TKIP
: every 0 seconds
Wireless Commands
OPTIONAL
E-DOC-CTC-20061027-0012 v2.0