Eth Bridge Igmpsnooping Config - THOMSON ST780 WL Cli Reference Manual

eth bridge igmpsnooping config

Configure the bridge instance's IGMP Snooping flags
Syntax
eth bridge igmpsnooping config
where:
brname
state
floodrp
floodmcast
282
[brname = <{bridge}>]
[state = <{enabled|disabled}>]
[floodrp = <{disabled|enabled}>]
[floodmcast = <{disabled|enabled}>]
The name of a bridge instance
Enable/Disable the IGMP Snooping
The default is enabled
Enable/Disable flooding reports to all ports
The default is disabled
Enable/Disable flooding unregistered multicasts
The default is disabled
Eth Commands
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20061027-0012 v2.0