Ip Debug Httpprobe - THOMSON ST780 WL Cli Reference Manual

IP Commands

ip debug httpprobe

Send a HTTP probe.
This HTTP probe will measure the Round Trip Time (RTT) taken to connect and access data from a HTTP
server.
SYNTAX:
ip debug httpprobe
where:
url
version
EXAMPLE:
The first example shows the measured time for a file that was downloaded:
=>ip httpprobe url=http://download.winzip.com/wzipse22.exe
DNS Lookup-RTT
TCP Connect-RTT
HTTP transaction-RTT = 18772 ms
Total RTT
PageSize
Download speed
=>
If the URL of a normal HTML page is used the figures are not so relevant, as shown in the example below:
=>ip httpprobe url=http://www.google.be
DNS Lookup-RTT
TCP Connect-RTT
HTTP transaction-RTT = 401 ms
Total RTT
PageSize
=>
DESCRIPTION:
>
RTT taken to perform domain name lookup.
>
RTT taken to perform a TCP connect to the HTTP Server.
>
RTT taken to send a request and get a response back from the HTTP Server (the probe retrieves the base
HTML page only as body, and does not request hyperlinks within this page).
The SpeedTouch will send the HTTP request, receive the reply, and report the RTT statistics (including the size
of the page returned).
E-DOC-CTC-20061027-0012 v2.0
url = <string>
[version = <{1.0 | 1.1}>]
The Uniform Resource Locator (URL) identifying the HTTP server.
The version of the HTTP server.
The default is 1.0.
= 19 ms
= 20 ms
= 18811 ms
= 385712 Bytes
= 20.54 KByte/s
= 19 ms
= 75 ms
= 495 ms
= 3448 Bytes
REQUIRED
OPTIONAL
469