Connection Describe - THOMSON ST780 WL Cli Reference Manual

connection describe

Describe the streams of a connection.
SYNTAX:
connection describe
where:
id
EXAMPLE:
=>connection list
ID proto state
-- ----- -----
62 tcp ACTIVE
INIT: 124 192.168.
RESP: 125 192.168.
=>connection describe id=62
ID proto state
-- ----- -----
62 tcp ACTIVE
FW
IDS
NAT
INIT: 124 192.168.
ROUTING
LABEL
IPQOS
TRIGGER
RESP: 125 192.168.
ROUTING
LABEL
IPQOS
TRIGGER
=>
92
[id = <number{0-2048}>]
A number between 0 and 2048.
Represents the ID of the connection to be
described.
Note If not specified, the connection with ID 0
will be described.
Tip
substate flags
-------- -----
[TCPS_ESTABLISHED-TCPS_ESTABLISHED] [......] 15' 8"
1. 64: 1979 192.168.
1.254: 23 192.168.
substate flags
-------- -----
[TCPS_ESTABLISHED-TCPS_ESTABLISHED] [......] 14' 59"
: cache = valid; FP
: ...
: cache = valid; No translation
1. 64: 1979 192.168.
: cache = valid; FP (gateway 127.0.0.1)
: cache = valid; FP (no route label); FP (QoS label Interactive)
: cache = valid; FP (label <no meter>, intf <no meter>)
: cache = valid; FP (no trigger)
1.254: 23 192.168.
: cache = valid; FP (gateway 192.168.1.254)
: cache = valid; FP (no route label); FP (QoS label default)
: cache = valid; FP (label <no meter>, intf <no meter>)
: cache = valid; FP (no trigger)
Connection Commands
Use the command :connection list
to obtain the IDs of the
different connections.
timeout
-------
1.254: 23 [...] LocalNetwork
1. 64: 1979 [R..] loop
timeout
-------
1.254: 23 [...] LocalNetwork
1. 64: 1979 [R..] loop
OPTIONAL
548 tcp 0
396 tcp 0
576 tcp 0
412 tcp 0
E-DOC-CTC-20061027-0012 v2.0