Igmp Proxy Config - THOMSON ST780 WL Cli Reference Manual

IGMP Commands

igmp proxy config

Configure the IGMP proxy.
SYNTAX:
igmp proxy config
where:
state
qi
qri
lmqi
rv
requirera
localgroup
E-DOC-CTC-20061027-0012 v2.0
[state = <{disabled | enabled}>]
[qi = <number{1-86400}>]
[qri = <number{1-86400}>]
[lmqi = <number{1-86400}>]
[rv = <number{2-10}>]
[requirera = <{disabled | enabled}>]
[localgroup = <{disabled | enabled}>]
Enable or disable the IGMP proxy.
The default is enabled.
A number between 1 and 86400.
Represents the interval in seconds between general queries sent
by the querier.
A number between 1 and 86400.
Represents the maximum response time in seconds for an IGMP
client in reply to general queries.
A number between 1 and 86400.
Represents the maximum response time in seconds for an IGMP
client in reply to group specific queries.
A number between 2 and 10.
Represents the robustness variable, which allows tuning for
expected IGMP packet loss.
Enable or disable the router alert IP option check.
The default is disabled.
Enable or disable the processing of a local multicast group in an
IGMP packet.
The default is disabled.
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
419