Wireless Macacl Register - THOMSON ST780 WL Cli Reference Manual

Wireless Commands

wireless macacl register

Start a registration process (only for register mode).
Prerequisite
The register mode must be enabled (with the command :wireless macacl config control=register).
i
If the register mode is not enabled when the registration process is started, a warning will be
displayed.
Registration Process
After executing this command, the ACL will be unlocked for a time period of 60 seconds.
Any wireless client who tries to assiociate with the Thomson ST during this period and who has the correct
wireless settings, will be added to the ACL.
SYNTAX:
wireless macacl register
where:
proceed
EXAMPLE:
=>wireless macacl register proceed=enabled
Registration process will be started, new stations can associate during 60 seconds.
=>wireless macacl register proceed=disabled
=>
E-DOC-CTC-20061027-0012 v2.0
proceed = <{disabled | enabled}>
Confirm to start the registration process.
Choose between:
>
disabled
>
enabled.
REQUIRED
821