Nat Maplist - THOMSON ST780 WL Cli Reference Manual

NAT Commands

nat maplist

Display the address mapping for a NAT enabled interface.
SYNTAX:
nat maplist
where:
intf
expand
string
beginstring
EXAMPLE:
=>nat maplist
Idx Type Interface
1 NAPT myPPP_ppp
1 NAPT eth0
2 NAPT eth0
3 NAPT eth0
=>maplist intf=myPPP_ppp expand=enabled
Idx Type Interface
1 NAPT myPPP_ppp
=>
RELATED COMMANDS:
nat mapadd
nat mapdelete
E-DOC-CTC-20061027-0012 v2.0
[intf = <string>]
[expand = <{disabled | enabled}>]
[string = <string>]
[beginstring = <string>]
The IP interface name.
Note If not specified, the address mapping for all the NAT
enabled interfaces will be shown.
Enable or disable expanded listing.
The default is disabled.
string matching condition
beginstring matching condition
Outside Address
100.100.100.1
any:80
any:1080
any:8080
Outside Address
100.100.100.1
Access List................... 10.0.0.0/24
Foreign Address............... any
Protocol...................... any
Flags......................... Static
Description................... Outbound NAPT without defserver
Add an address mapping to a Network Address Translation (NAT) enabled
interface.
Delete an address mapping from a NAT enabled interface.
Inside Address Use
unmapped 0
127.0.0.1:8080 0
127.0.0.1:8080 0
127.0.0.1:8080 0
Inside Address Use
unmapped 0
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
577