Sntp Add - THOMSON ST780 WL Cli Reference Manual

sntp add

Add a Network Time Protocol (NTP) server to the NTP server list.
The internal Thomson ST real time clock (SNTP client) will be synchronized with the NTP server.
SYNTAX:
sntp add
where:
addr The IP address of the NTP server to add to the list.
Note
name The DNS name of NTP server to be added to list. If both the IP address
and the DNS name are provided, the IP address is ignored.
Note
version The SNTP version of the NTP server.
Select either 1, 2, 3, or 4 following NTP server supported versions.
The default is 4.
EXAMPLE:
=>sntp list
IP Address
100.101.110.113
=>sntp add addr=100.101.110.111
=>sntp list
IP Address
100.101.110.111
100.101.110.113
=>
RELATED COMMANDS:
sntp delete
sntp list
716
[addr = <ip-address>]
[name = <string>]
[version = <number{1-4}>]
This parameter is optional in this respect that either an IP
address or the name of an NTP server must be specified.
This parameter is optional in this respect that either an IP
address or the name of an NTP server must be specified
Version Status
4 Synchronized
Version Status
4 contacting ...
4 Synchronized
Delete an NTP server from the NTP server list.
List the NTP servers.
SNTP Commands
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20061027-0012 v2.0