adsl config
Show/set the Asymmetric Digital Subscriber Line (ADSL) configuration.
SYNTAX:
adsl config
where:
opermode
trace
EXAMPLE:
The example below shows the default configuration for a Thomson ST ADSL/POTS variant:
=>adsl config
ADSL configuration:
opermode = multi_adsl2plus
trace = on
modemoption = 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
=>
8
[opermode = <{multimode | multi_adsl2 | multi_readsl2
| multi_adsl2plus}>]
[trace = <{disabled | enabled}>]
The operational mode of the Thomson ST.
Choose between:
>
multimode
>
multi_adsl2
>
multi_readsl2
>
multi_adsl2plus
The default is multi_adsl2plus.
Enable or disable ADSL tracing.
The default is enabled.
ADSL Commands
OPTIONAL
OPTIONAL
E-DOC-CTC-20061027-0012 v2.0