Connection Appinfo - THOMSON ST780 WL Cli Reference Manual

connection appinfo

Display CONN/NAT application specific info.
SYNTAX:
connection appinfo
where:
application
EXAMPLE:
=>connection appinfo application=SIP
SIP ALG session SIPALG: pool=138, in use=0, bottom=138
=>
RELATED COMMANDS:
connection appconfig
connection applist
84
application = <{string}>
The name of a CONN/NAT application helper.
Use the command :connection
Tip
applist to obtain a list of CONN/NAT
application helpers.
Configure the available CONN/NAT application helpers.
List the available CONN/NAT application helpers.
Connection Commands
REQUIRED
E-DOC-CTC-20061027-0012 v2.0