Dsd Intercept Config - THOMSON ST780 WL Cli Reference Manual

dsd intercept config

Display/modify the HTTP Intercept configuration.
SYNTAX:
dsd intercept config
where:
WDSpoofedIP
servertimeout
servererrorurl
categoryerrorurl
monitorintercept
url
urlblockedurl
imageredirect
imageredirecturl
alwaysuseip
EXAMPLE:
=>dsd intercept config
WAN down spoofed IP
Servertimeout
Connection failure
Category server error : /cgi/b/ic/connect/
Monitor intercept
Unauthorized request
Image redirecting
Image redirect url
Always use IP
=>
218
[WDSpoofedIP = <ip-address>]
[servertimeout = <number>]
[servererrorurl = <string>]
[categoryerrorurl = <string>]
[monitorintercepturl = <string>]
[urlblockedurl = <string>]
[imageredirect = <{disabled | enabled}>]
[imageredirecturl = <string>]
[alwaysuseip = <{disabled | enabled}>]
The IP address indicating unavailable WAN connection.
The default is 198.18.1.1.
A number of seconds.
Represents the server timeout for redirect action.
The default is 10.
The destination URL when the connection to the server failed.
The destination URL when the connection to the category server
failed.
The destination URL when the request is intercepted by the
monitor thread.
The destination URL when the requested URL is blocked.
Enable or disable substitution of blocked images.
The default is enabled.
The URL of the image used when substituting blocked images.
Always use IP address when redirecting to a local page (enabled)
or not (disabled).
The default is enabled.
: 198.18.1.1
: 10 sec
: /cgi/b/ic/connect/
: /cgi/b/ic/connect/
: /cgi/b/sfltr/blocked/
: enabled
: /images/spacer.gif
: enabled
DSD Commands
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20061027-0012 v2.0