Snmp Config - THOMSON ST780 WL Cli Reference Manual

snmp config

Show/set global Simple Network Management Protocol (SNMP) parameters.
SYNTAX:
snmp config
where:
sysContact
sysName
sysLocation
EXAMPLE:
=>snmp config
SNMP System Contact
SNMP System Name
SNMP System Location
All SNMP traps : ENABLED
Delay, in secs before first trap is sent
=>
700
[sysContact = <quoted string>]
[sysName = <quoted string>]
[sysLocation = <quoted string>]
The SNMP system contact.
The default is Service Provider.
The SNMP system name.
The SNMP system location.
The default is Customer Premises.
: Service Provider
: SpeedTouch 620
: Customer Premises
SNMP Commands
: 90
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20061027-0012 v2.0