Dsd Config - THOMSON ST780 WL Cli Reference Manual

dsd config

Display/modify the Differentiated Service Delivery (DSD) framework configuration.
SYNTAX:
dsd config
where:
state Choose between:
>
>
>
i
If you do not provide any parameters, the current configuration will be shown.
EXAMPLE:
=>dsd config
State : automatic
=>
212
[state = <{disabled | enabled | automatic}>]
automatic (default):
By default (DSD config state is automatic), the DSD framework is
not active, for example no URL filtering or web site filtering is
applied. Only in case the state of the default WAN IP interface goes
down, DSD framework will be activated, for example in case the
PPP link goes down (implying HTTP intercept active).
enabled:
If DSD config state is enabled the DSD framework is
disabled
DSD Commands
OPTIONAL
always active.
E-DOC-CTC-20061027-0012 v2.0