Config Load - THOMSON ST780 WL Cli Reference Manual

config load

Load complete saved (backup) or default configuration file.
i
Use the command :config flush before loading a configuration file.
SYNTAX:
config load
where:
load_ip Load IP settings (enabled) or not (disabled).
Note
defaults Load default configuration (enabled) or saved configuration (disabled).
Note
flush Flush the current configuration before loading a new configuration
(enabled) or not (disabled).
echo Echo each command string when loaded (enabled) or not (disabled).
filename Name of the configuration file to be loaded.
78
[load_ip = <{enabled | disabled}>]
[defaults = <{enabled | disabled}>]
[flush = <{enabled | disabled}>]
[echo = <{disabled | enabled}>]
[filename = <string>]
Not keeping the IP settings could cause lost IP connectivity in the
LAN.
If not specified, the saved configuration will be loaded.
Config Commands
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20061027-0012 v2.0