Ip Ipconfig - THOMSON ST780 WL Cli Reference Manual

ip ipconfig

Modify an IP address configuration.
SYNTAX:
ip ipconfig
where:
addr The IP address to be configured.
preferred Make this IP address the preferred address for that subnet (enabled) or
not (disabled).
The default is disabled.
primary Make this IP address the primary address for the interface (enabled) or
not (disabled).
The default is disabled.
EXAMPLE:
=>ip iplist
Interface
1 eth0
1 eth0
0 loop
=>ip ipconfig addr=169.254.141.11 preferred=enabled primary=enabled
=>ip iplist
Interface
1 eth0
1 eth0
0 loop
=>
i
The primary IP address is marked with "*" in the list.
450
addr = <ip-address>
[preferred = <{disabled | enabled}>]
[primary = <{disabled | enabled}>]
Type IP-address
Ethernet 10.0.0.138
Ethernet 169.254.141.11
Ethernet 127.0.0.1
Type IP-address
Ethernet 10.0.0.138
Ethernet *169.254.141.11
Ethernet 127.0.0.1
Point-to-point/Mask
255.255.255.0
255.255.0.0
255.0.0.0
Point-to-point/Mask
255.255.255.0
255.255.0.0
255.0.0.0
E-DOC-CTC-20061027-0012 v2.0
IP Commands
REQUIRED
OPTIONAL
OPTIONAL