Dhcp Client Ifattach - THOMSON ST780 WL Cli Reference Manual

DHCP Commands

dhcp client ifattach

Activate a DHCP client.
SYNTAX:
dhcp client ifattach
where:
intf
EXAMPLE:
=>dhcp client iflist
myPPP_ppp : [INIT]
Number of leases: 1
Total size of table: 36, in use: 1, free: 97 %
=>dhcp client ifattach intf=myPPP_ppp
=>dhcp client iflist
myPPP_ppp : [SELECTING]
Number of leases: 1
Total size of table: 36, in use: 1, free: 97 %
=>
RELATED COMMANDS:
dhcp client ifadd
dhcp client ifdetach
dhcp client ifrenew
interface list
E-DOC-CTC-20061027-0012 v2.0
The name of the dynamic interface for which a DHCP client
was created.
flags = bc dns rt
IP address : 0.0.0.0
HW address [SpeedTouch] : 00
DHCP server: 255.255.255.255
metric : rt = 1, DNS = 1
flags = bc dns rt
IP address : 0.0.0.0
HW address [SpeedTouch] : 00
DHCP server: 255.255.255.255
metric : rt = 1, DNS = 1
trying to get a lease for 1 sec
transmission of DISCOVER in 0 sec
retransmission timeout: 4
nbr of retransmissions: 2
Create a DHCP client.
De-activate a DHCP client and releases its lease.
Renew the DHCP lease.
Display interfaces.
intf = <string>
REQUIRED
113