Firewall Commands - THOMSON ST780 WL Cli Reference Manual

Firewall Commands

16 Firewall Commands
Introduction
This chapter describes the commands of the firewall command group.
Contents
This chapter covers the following commands:
firewall config
firewall clear
firewall list
firewall chain add
firewall chain delete
firewall chain flush
firewall chain list
firewall debug clear
firewall debug stats
firewall debug traceconfig
firewall level add
firewall level delete
firewall level flush
firewall level list
firewall level modify
firewall level set
firewall rule add
firewall rule delete
firewall rule flush
firewall rule list
firewall rule modify
firewall rule debug clear
firewall rule debug stats
firewall rule debug
traceconfig
E-DOC-CTC-20061027-0012 v2.0
Configure the firewall options.
Flush the firewall configuration.
List the firewall configuration.
Add a chain.
Delete a chain.
Flush all chains.
List all chains.
Clear the firewall statistics.
Display the firewall statistics.
Configure the firewall trace options.
Add a security level.
Delete a security level.
Flush the security level configuration.
List all the security levels.
Configure a security level.
Set the security level or display the current security level.
Add a firewall rule.
Delete a firewall rule.
Flush all firewall rules.
Show a list of the firewall rules in a chain.
Modify a firewall rule.
Clear the firewall rule statistics.
Show the firewall rule statistics.
Display or modify the rule trace configuration.
346
348
349
351
353
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
371
372
374
376
345